Innsbrook chalets & the West St. Louis area
I clear invasive bush honeysuckle with a remote-controlled crawler — the kind of ground a mower, a tractor or a skid steer can't safely touch. Steep, wooded, wet, overgrown for years: those are the lots this machine was made for.
Free estimates. No cost to look, no pressure to book.
A flail deck on tracks, run from a remote. It cuts and mulches in the same pass, and it goes onto ground a mower or a tractor has no business being on.
See it in action.
Most honeysuckle in this area is on the ground nobody wants to work: the ravine behind the chalet, the slope down to the water, the back third of the lot. Hand crews take forever and cost accordingly. A tractor or skid steer won't go there, and it tears up what's left of the ground when it tries.
Cutting honeysuckle down and getting rid of it for good are not the same job. Here is what I do, and what it takes.
Honeysuckle cut down and mulched in place. This is where every lot starts — you get your sightlines, your access and your ground back, and you can finally see what you're dealing with underneath.
An annual pass over your lot to knock back resprouts and seedlings. Honeysuckle is a marathon, not a one-time job — this is the piece that keeps you from ending up back where you started.
Every lot is quoted individually — density, slope and access change the job more than acreage does. Tell me about your lot and I'll give you a real number.
Walk your lot, take three or four pictures, and text them to me with your address. That's usually all I need for a ballpark.
I come look at the lot and give you a flat price for the job. Not an hourly guess.
I clear the honeysuckle with the crawler. You don't need to be home.
I'll tell you honestly what your lot will do next, and you can add an annual pass so the resprouts don't get ahead of you.
Will it come back?
Yes, unless you keep after it. Bush honeysuckle resprouts from cut stumps, and the seed already in your soil keeps germinating for years. Cutting it down is real progress — it stops the spread, it opens the ground up, and it buys you years of not fighting it — but anyone telling you one cut and it's gone forever is selling you something. The honest plan for a lot you actually want clear is a cut, then a pass each year to knock back what comes up. That's the Keep It Gone option above, and it's the difference between cleared and clear.
Do you remove trees?
No. Honeysuckle, brush and undergrowth only. Innsbrook restricts removing trees over 6 inches in diameter without prior written approval, so I'll flag anything that falls outside what I can clear for you.
Can you actually get to my lot?
That's the whole reason for the machine. Steep slopes, creek bottoms, tight woods, wet ground, a chalet lot nobody has touched in a decade — send me a photo and I'll tell you straight whether it's workable.
What happens to the cut brush?
It's mulched where it stands, which is what you want — the material breaks down and feeds the ground. We'll talk through anything that needs hauled or burned at the estimate.
How big a lot can you do?
Density and terrain matter more than acreage, so I quote per job rather than per acre. Some lots are done in an afternoon; a heavily overgrown acre takes longer than four open ones.
How thick a honeysuckle can it cut?
Up to roughly 2 inches across. Almost all bush honeysuckle gets cut at that size or under — it is the old, thick trunks that are the exception, and those get a chainsaw first. It only adds time, not a different price.
What area do you cover?
Innsbrook first, plus the surrounding area — Wright City, Warrenton, Marthasville, Washington, Labadie, Augusta, Foristell, New Melle and the west side of the St. Louis metro. Ask if you're not sure.
Three or four pictures and the address is enough for a ballpark. If you'd rather, I'll come walk it — that's still the fastest way to get a number you can trust.